OVERVIEW MILLING MOTORS Whether in the private sector or in the industrial application, a milling motor has to meet the most different requirements. It not only has to be suitable for the existing machine series, it should also correspond to the personal level of skill. Additionally, further characteristics of the tool, such as power, speed or shaft diameter, should be considered in the selection of a milling motor as well. In order to optimally support you in your choice, you will find all our milling motors listed in the following table for a direct comparison.

 Compatible  withSound LevelMax.Speed RangePowerSpeed ControlWeightTool Holder ChangerColletShaft Diameter
D-SeriesM-SeriesQ-SeriesConcentricityInput PowerOutput Power
MM-800yesyesyes71 db<0,01 mm*7’000-25’000rpm800 W520 Wmanual1,6 kg–OZ/401E1,0 – 8,0 mm
MM-1000yesyesyes71 db<0,01 mm*4’000-25’000rpm1000 W650 Wmanual1,6 kg–OZ/401E1,0 – 8,0 mm
MM-1000-DIyesyesyes71 db<0,01 mm*4’000-25’000rpm1000 W650 Wmanual + electronic1,6 kg–OZ/401E1,0 – 8,0 mm
HF-500yesyesno70 db<0,01 mm*5’000-20’000rpm500 W400 Wmanual + electronic650 g–ER111,0 – 8,0 mm
AMB 800 FMEyesyesno78 db0,15 mm**10’000-29’000rpm800 W420 Wmanual1,4 kg–OZ/401E1,0 – 10,0 mm
AMB 1050 FME-1 DIyesyesno78 db0,15 mm**3’500-25’000rpm1050 W600 Weletronic1,7 kg–OZ/401E1,0 – 8,0 mm
AMB 1050 FME-W Tool Changernonoyes78 db0,05 mm**5’000-25’000rpm1050 W600 Weletronic2,9 kgSK20ER161,0 – 12,0 mm
AMB 1400 FME-P DIyesyesno78 db0,05 mm**3’500-25’000rpm1400 W600 Weletronic1,8 kg–ER161,0 – 12,0 mm
HFS-2200-A (EU) complete 230Vnonoyes87 db<0,01 mm*2’000-24’000rpm2200 W1900 Weletronic4,5 kg–ER201,0 – 14,0 mm
HFS-2200-A (EU) complete 400Vnonoyes87 db<0,01 mm*2’000-24’000rpm2200 W1900 Weletronic4,5 kg–ER201,0 – 14,0 mm
HFS-2200-P-ATCnonoyes86 db<0,008 mm*2’000-24’000rpm2200 W1960 Weletronic12 kgSK30ER253,0 – 20,0 mm
*in the cone
**at a distance of 25 mm to the collet